Solid Carbide Router Bit - Spiral Ball End Up Cut 2 Flute
Solid Carbide Router Bits
Each router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. This ultimate micro-grain carbide formulation gives the longest tool life and edge retention ensuring a very clean and accurate cut that leads to the ultimate finish. These STC router bits are suitable for use on softwoods, hardwoods, veneers, plastic materials, laminates, and composite materials.
Spiral Ball End Two Flute Bits
Spiral ball end two flute bits leave a rounded bottom and are used for grooving or edge work in CNC machines, however they can be used in handheld routers. The up-cut spiral profiled bits provide fast chip removal whilst routing, with the bit pulling chips up and clear of the cutting area. This eliminates the buildup of dust and chips, ensuring an ultra smooth cut and preventing burning. The bits are designed for use with aluminium, plastic, wood and wood based materials.
Superior Finish and Performance
Each spiral has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly as well as providing efficient chip ejection. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety. ©
Each router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. This ultimate micro-grain carbide formulation gives the longest tool life and edge retention ensuring a very clean and accurate cut that leads to the ultimate finish. These STC router bits are suitable for use on softwoods, hardwoods, veneers, plastic materials, laminates, and composite materials.
Spiral Ball End Two Flute Bits
Spiral ball end two flute bits leave a rounded bottom and are used for grooving or edge work in CNC machines, however they can be used in handheld routers. The up-cut spiral profiled bits provide fast chip removal whilst routing, with the bit pulling chips up and clear of the cutting area. This eliminates the buildup of dust and chips, ensuring an ultra smooth cut and preventing burning. The bits are designed for use with aluminium, plastic, wood and wood based materials.
Superior Finish and Performance
Each spiral has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly as well as providing efficient chip ejection. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety. ©
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Solid Carbide Router Bit - Spiral Ball End Up Cut 2 Flute
Solid Carbide Router Bit - Spiral Ball End Up Cut 2 Flute
Solid Carbide Router Bits
Each router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. This ultimate micro-grain carbide formulation gives the longest tool life and edge retention ensuring a very clean and accurate cut that leads to the ultimate finish. These STC router bits are suitable for use on softwoods, hardwoods, veneers, plastic materials, laminates, and composite materials.
Spiral Ball End Two Flute Bits
Spiral ball end two flute bits leave a rounded bottom and are used for grooving or edge work in CNC machines, however they can be used in handheld routers. The up-cut spiral profiled bits provide fast chip removal whilst routing, with the bit pulling chips up and clear of the cutting area. This eliminates the buildup of dust and chips, ensuring an ultra smooth cut and preventing burning. The bits are designed for use with aluminium, plastic, wood and wood based materials.
Superior Finish and Performance
Each spiral has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly as well as providing efficient chip ejection. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety. ©
Each router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. This ultimate micro-grain carbide formulation gives the longest tool life and edge retention ensuring a very clean and accurate cut that leads to the ultimate finish. These STC router bits are suitable for use on softwoods, hardwoods, veneers, plastic materials, laminates, and composite materials.
Spiral Ball End Two Flute Bits
Spiral ball end two flute bits leave a rounded bottom and are used for grooving or edge work in CNC machines, however they can be used in handheld routers. The up-cut spiral profiled bits provide fast chip removal whilst routing, with the bit pulling chips up and clear of the cutting area. This eliminates the buildup of dust and chips, ensuring an ultra smooth cut and preventing burning. The bits are designed for use with aluminium, plastic, wood and wood based materials.
Superior Finish and Performance
Each spiral has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly as well as providing efficient chip ejection. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety. ©
Select Option
From $49.50
Original: $165.00
-70%Solid Carbide Router Bit - Spiral Ball End Up Cut 2 Flute—
$165.00
$49.50Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Solid Carbide Router Bits
Each router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. This ultimate micro-grain carbide formulation gives the longest tool life and edge retention ensuring a very clean and accurate cut that leads to the ultimate finish. These STC router bits are suitable for use on softwoods, hardwoods, veneers, plastic materials, laminates, and composite materials.
Spiral Ball End Two Flute Bits
Spiral ball end two flute bits leave a rounded bottom and are used for grooving or edge work in CNC machines, however they can be used in handheld routers. The up-cut spiral profiled bits provide fast chip removal whilst routing, with the bit pulling chips up and clear of the cutting area. This eliminates the buildup of dust and chips, ensuring an ultra smooth cut and preventing burning. The bits are designed for use with aluminium, plastic, wood and wood based materials.
Superior Finish and Performance
Each spiral has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly as well as providing efficient chip ejection. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety. ©
Each router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. This ultimate micro-grain carbide formulation gives the longest tool life and edge retention ensuring a very clean and accurate cut that leads to the ultimate finish. These STC router bits are suitable for use on softwoods, hardwoods, veneers, plastic materials, laminates, and composite materials.
Spiral Ball End Two Flute Bits
Spiral ball end two flute bits leave a rounded bottom and are used for grooving or edge work in CNC machines, however they can be used in handheld routers. The up-cut spiral profiled bits provide fast chip removal whilst routing, with the bit pulling chips up and clear of the cutting area. This eliminates the buildup of dust and chips, ensuring an ultra smooth cut and preventing burning. The bits are designed for use with aluminium, plastic, wood and wood based materials.
Superior Finish and Performance
Each spiral has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly as well as providing efficient chip ejection. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety. ©
